How to get Rover 39100 SN8 E10 radio code ?

The car radio code is a security system that protects your rover radio from thieves, but if you remove the radio from your vehicle or disconnect the battery, you will need to enter your rover 39100 sn8 e10 unlock code so that the head unit can operate again. most times the radio code is printed on a small card and included in your owner's manual. If you have lost your rover 39100 sn8 e10 radio code or bought a used car stereo, you can still easily retrieve your code.

"rover radio ask for unlock code"

The car radio code is indicated on many rover models on a small white sticker inside the glove box. The unlock code will be labeled "Anti-theft radio code". Enter this code using the preset radio buttons of your rover 39100 sn8 e10 radio. You will hear a beep and then the radio will resume normal functions.

If you do not find your rover 39100 sn8 e10 radio code in the glove box, do not worry. You can still recover it. But first you will need the serial number of your rover 39100 sn8 e10 radio. So here is how:

1- How to remove your Rover 39100 sn8 e10 radio ?

So we'll start by making sure that the car's engine is shut down. You must now have the car radio release keys for the first step. With these car radio removal tools, you will remove the outer cover of your rover 39100 sn8 e10 radio. Now, simply pull the outer cover with these extraction keys.

Why should you use the car radio release keys to remove the rover 39100 sn8 e10 radio?

I always recommend using proper tools to remove the rover 39100 sn8 e10 car radio. Many people do not have the car radio extraction tools at home, but these removal tools are relatively cheap and you can order them from amazon.

"rover radio removal keys"

When you remove the rover 39100 sn8 e10 radio from the car without using the extraction keys, do not rush to remove it. You could break the outer plastic or even damage the car stereo wiring.

You must use the extraction keys simultaneously and push them in both sides of the rover 39100 sn8 e10 radio to extract it. This is a simple process and you can easily remove the external cover. Be careful not to damage you.

"remove rover radio"

Now that the external cover of your rover 39100 sn8 e10 radio is removed, you can see the plastic inside. You can easily remove the inner plastic with your hands. Now, you just have to push up and down, then remove the inner plastic. Normally, it comes out easily, you have to be careful and slow to avoid breaking frames.

You can still use two extraction keys and put them at the corners of the radio frames and pull the frame by exerting pressure on the extraction keys. If it still does not work, you will have to remove the metal that holds it inside.

To remove the metal clamps that keep your rover 39100 sn8 e10 radio from getting stuck in one position, you will need two clamps. Hold the corners of the frames with these pliers and pull them out slowly.

Very carefully, remove it by holding the two forceps firmly with your hands. You will need to remove it using both forceps simultaneously. When pulling it, make sure it is straight, otherwise it could break or get stuck. I always recommend following the instructions in the instruction manual supplied with your rover radio.

You can find thousands of guides in how to remove rover radio using Youtube or google if you want to take care of this task yourself.

---

2- How to find Rover radio serial number ?

Then you will need the serial number rover 39100 sn8 e10 to retrieve your car radio code.

You can find this serial number on the anti-theft identification card that is usually placed in the glove box at the time of purchase. you can also find the serial number of the radio on the screen of your rover radio itself.

"rover radio serial number"

There are different types of rover serial numbers, or as called sometimes the "security code". These are located on the top or side of the car stereo box or printed on the label. As the example shows, this is the information needed to generate the correct car radio unlocking code for you. An example of this would be "CG000502027075", Please see the images below for reference.

"rover radio serial number"

The serial number is sometimes printed in the metal case, as indicated by the serial number of this rover radio.
It is essential to ensure that all numbers and letters are correct in order to get the correct unlock code for your rover radio.

"rover radio serial number"

Once you have the information you need, get your rover 39100 sn8 e10 unlock code by filling out the form above with serial number and email address.

3- How to enter Rover radio unlock code?

Almost all rover radio codes consist of 4 to 5 digits. when your radio displays the word CODE, you will need to enter this security code from 4 to 5 digits. This is done by pressing the preset radio buttons corresponding to the code numbers.

So the exact process for entering a rover car radio code varies from one situation to another. But in most times, you will use the volume or tuner buttons to select numbers, then click the home button or press another button to advance. It is important to know what you are doing before enter the rover 39100 sn8 e10 radio unlock code.